DATA SHEETPHOTOCOUPLERPS2701-1,PS2701-2,PS2701-4HIGH ISOLATION VOLTAGESOP MULTI PHOTOCOUPLER−NEPOC Series−TMDESCRIPTION
The PS2701-1, PS2701-2, PS2701-4, are optically coupled isolators containing a GaAs light emitting diode and anNPN silicon phototransistor.
This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.It is designed for high density mounting applications.
FEATURES
•High isolation voltage (BV = 3 750 Vr.m.s.)•SOP (Small Outline Package) type
•High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.)
•Ordering number of taping product (only 1-channel type) : PS2701-1-E3, E4, F3, F4•UL approved: File No. E72422 (S)•VDE0884 approved (Option)
APPLICATIONS
•Hybrid IC
•Measuring instruments•Power supply
•Programmable logic controllers
ORDERING INFORMATION
Part NumberPS2701-1PS2701-2PS2701-4PS2701-1-VPS2701-2-VPS2701-4-VPackage4-pin SOP8-pin SOP16-pin SOP4-pin SOP8-pin SOP16-pin SOPVDE0884 approved products (Option)Safety Standard ApprovalStandard products• UL approvedThe information in this document is subject to change without notice.Document No. P11306EJ6V0DS00 (6th edition)Date Published December 1997 NS CP (K)Printed in Japan
The mark shows major revised points.
©
1988
PS2701-1,PS2701-2,PS2701-4PACKAGE DIMENSIONS (in millimeters)
4.5 MAX.PS2701-1TOP VIEW431. Anode2. Cathode3. Emitter4. Collector127.0±0.34.41.32.3 MAX.0.1±0.12.540.4+0.10–0.051.2 MAX.0.25 M0.100.15+–0.052.00.5±0.3PS2701-29.3 MAX.876TOP VIEW51. 3. Anode2. 4. Cathode5. 7. Emitter6. 8. Collector12347.0±0.34.41.32.3 MAX.0.1±0.10.100.15+–0.052.00.4+0.10–0.052.540.25 M1.2 MAX.0.5±0.3PS2701-419.46 MAX.1615TOP VIEW1413121110912345678 1. 3. 5. 7. Anode 2. 4. 6. 8. Cathode 9. 11. 13. 15. Emitter10. 12. 14. 16. Collector7.0±0.34.41.32.3 MAX.0.1±0.10.100.15+–0.052.00.4+0.10–0.050.25 M2.541.2 MAX.0.5±0.32
PS2701-1,PS2701-2,PS2701-4ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
ParameterSymbolRatingsUnitPS2701-1PS2701-2,PS2701-4DiodeForward Current (DC)IF50mAReverse VoltageVR6VPower Dissipation Derating∆PD/°C0.8mW/°CPower DissipationPD80mW/chPeak Forward Current*1IFP1ATransistorCollector to Emitter VoltageVCEO40VEmitter to Collector VoltageVECO6VCollector CurrentIC80mA/chPower Dissipation Derating∆PC/°C1.51.2mW/°CPower DissipationPC150120mW/chIsolation Voltage*2BV3 750Vr.m.s.Operating Ambient TemperatureTA–55 to +100°CStorage TemperatureTstg–55 to +150°C*1PW = 100 µs, Duty Cycle = 1 %
*2AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
3
PS2701-1,PS2701-2,PS2701-4ELECTRICAL CHARACTERISTICS (TA = 25 °C)
ParameterDiodeForward VoltageReverse CurrentTerminal CapacitanceTransistorCoupledCollector to EmitterCurrentCurrent Transfer RatioCollector SaturationVoltageIsolation ResistanceIsolation CapacitanceRise Time Fall Time *2*1SymbolVFIRCtICEOCTRVCE (sat)RI-OCI-OtrtfIF = 5 mAVR = 5 VConditionsMIN.TYP.1.1MAX.1.45UnitVµApFV = 0 V, f = 1 MHzIF = 0 mA, VCE = 40 VIF = 5 mA, VCE = 5 VIF = 10 mA, IC = 2 mAVI-O = 1 kVDCV = 0 V, f = 1 MHzVCC = 5 V, IC = 2 mA, RL = 100 Ω101130100501003000.3nA%VΩ0.435pFµs*2*1CTR rank (only PS2701-1)
P: 150 to 300 (%)L: 100 to 300 (%)M: 50 to 150 (%)*2Test circuit for switching time
Pulse inputPW = 100 s,µDuty cycle = 1/10IF50 ΩVOUTRL = 100 ΩVCC4
PS2701-1,PS2701-2,PS2701-4TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
DIODE POWER DISSIPATION vs.AMBIENT TEMPERATURE100)Wm( DP75 noitapiss50iD rewoP 25edoiD0255075100Ambient Temperature TA (˚C)FORWARD CURRENT vs.FORWARD VOLTAGE100)A10TA = +100 ˚Cm(+75 ˚C FI +50 ˚C tnerru1C+25 ˚C dr0 ˚Caw–25 ˚Cro0.1F–55 ˚C0.010.60.81.01.21.41.6Forward Voltage VF (V)COLLECTOR TO EMITTER DARKCURRENT vs. AMBIENT TEMPERATURE)An10 000( OECI t1 000nVCE = 40 Ver24 VruC k10010 VraD rett10imE ot r1otcelloC0.1–60–40–20020406080100Ambient Temperature TA (˚C)TRANSISTOR POWER DISSIPATION vs.AMBIENT TEMPERATURE)200Wm( CP n150oitaPS2701-1pis1.5 mW/˚CsiD100 rePS2701-2,woPS2701-4P ro501.2 mW/˚CtsisnarT0255075100Ambient Temperature TA (˚C)COLLECTOR CURRENT vs.COLLECTOR TO EMITTER VOLTAGE50)A40IF = 30 mAm( CI tn3020 mAerruC15 mA ro20tc10 mAelloC105 mA0246810Collector to Emitter Voltage VCE (V)COLLECTOR CURRENT vs.COLLECTOR SATURATION VOLTAGE50IF = 25 mA20)A10 mAm10( CI t55 mAnerruC22 mA rot1cello0.51 mAC0.20.10.00.20.40.60.81.0Collector Saturation Voltage VCE (sat) (V)5
PS2701-1,PS2701-2,PS2701-4NORMALIZED CURRENT TRANSFERRATIO vs. AMBIENT TEMPERATURENormalized Current Transfer Ratio CTRCURRENT TRANSFER RATIO vs.FORWARD CURRENT300Current Transfer Ratio CTR (%)1.2VCE = 5 V1.00.80.60.40.20.02502001501005000.050.1Normalized to 1.0 at TA = 25 ˚C, IF = 5 mA, VCE = 5 V–50–250255075100Ambient Temperature TA (˚C)0.5151050Forward Current IF (mA)SWITCHING TIME vs.LOAD RESISTANCE10050Switching Time t ( µ s)FREQUENCY RESPONSE1.21.0Normalized Gain GVVCC = 5 V, IC = 2 mAtontoff1050.80.60.40.2td10.5tsRL = 1 kΩ510 Ω300 Ω100 Ω0.1501002005001 k2 k0.025102050100200500Load Resistance RL (Ω)Frequency f (kHz)SWITCHING TIME vs.LOAD RESISTANCE1 000IF = 5 mA, VCC = 5 V, 500CTR = 169 %Switching Time t ( µ s)LONG TERM CTR DEGRADATIONtfts1.21.0CTR (Relative Value)1005010510.50.11000.80.60.40.20.0trtdIF = 1 mA, TA = 25 ˚CIF = 5 mA, TA = 25 ˚CIF = 20 mA, TA = 25 ˚CIF = 20 mA, TA = 60 ˚C5001 k5 k10 k50 k100 k1102103104105106Load Resistance RL (Ω)Time (Hr)Remark The measurement of TYPICAL CHARACTERISTICS are only for reference, not guaranteed.
6
PS2701-1,PS2701-2,PS2701-4TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)2.0±0.14.0±0.11.75±0.11.55±0.12.4±0.112.0±0.25.5±0.11.55±0.18.0±0.14.6±0.10.3Tape DirectionPS2701-1-E3PS2701-1-F3PS2701-1-E4PS2701-1-F4Outline and Dimensions (Reel)1.5±0.11.5±0.1φ21.0±0.8120˚PS2701-1-E3, E4: φ 178PS2701-1-F3, F4: φ 3307.4±0.11.5±0.560˚6.0±1φ662.0±0.5φ13.0±0.5Packing: PS2701-1-E3, E4 900 pcs/reel PS2701-1-F3, F4 3 500 pcs/reel12.4+2.0–0.018.4 MAX.7
PS2701-1,PS2701-2,PS2701-4RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering•Peak reflow temperature
•Time of temperature higher than 210 °C•Number of reflows•Flux
235 °C (package surface temperature)30 seconds or lessThree
Rosin flux containing small amount of chlorine (The flux with amaximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (˚C)(heating)to 10 s235 ˚C (peak temperature)210 ˚Cto 30 s120 to 160 ˚C60 to 90 s(preheating)Time (s)
Caution Please avoid to removed the residual flux by water after the first reflow processes.
Peak temperature 235 ˚C or below(2) Dip soldering•Temperature•Time
•Number of times•Flux
260 °C or below (molten solder temperature)10 seconds or lessOne
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of0.2 Wt % is recommended.)
8
PS2701-1,PS2701-2,PS2701-4SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)
Parameter
Symbol
Speck
Unit
Application classification (DIN VDE 0109)for rated line voltages ≤ 300 Vr.m.s.IVfor rated line voltages ≤ 600 Vr.m.s.IIIClimatic test class (DIN IEC 68 Teil 1/09.80)55/100/21
Dielectric strength
Maximum operating isolation voltage
UIORM710VpeakTest voltage (partial discharge test, procedure a for type test and random test)Upr
850
Vpeak
Upr = 1.2 × UIORM, Pd < 5 pC
Test voltage (partial discharge test, procedure b for random test)Upr
1 140
Vpeak
Upr = 1.6 × UIORM, Pd < 5 pCHighest permissible overvoltageUTR6 000Vpeak
Degree of pollution (DIN VDE 0109)2Clearance distance> 5mmCreepage distance
> 5mm
Comparative tracking index (DIN IEC 112/VDE 0303 part 1)CTI175Material group (DIN VDE 0109)III aStorage temperature rangeTstg–55 to +150°COperating temperature rangeTA–55 to +100
°C
Isolation resistance, minimum valueVIO = 500 V dc at TA = 25 °C
RisMIN.
1012ΩVIO = 500 V dc at TA MAX. at least 100 °C
RisMIN.
1011
Ω
Safety maximum ratings
(maximum permissible in case of fault, see thermal derating curve)Package temperature
Tsi150°CCurrent (input current IF, Psi = 0)Isi200mAPower (output or total power dissipation)Psi
300
mW
Isolation resistance
VIO = 500 V dc at TA = 175 °C (Tsi)
Ris MIN.
109
Ω
9
PS2701-1,PS2701-2,PS2701-4[MEMO]
10
PS2701-1,PS2701-2,PS2701-4[MEMO]
11
PS2701-1,PS2701-2,PS2701-4CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a
harmful substance if ingested. Please do not under any circumstances break thehermetic seal.
NEPOC is a trademark of NEC Corporation.
No part of this document may be copied or reproduced in any form or by any means without the prior writtenconsent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in thisdocument.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectualproperty rights of third parties by or arising from use of a device described herein or any other liability arisingfrom use of such device. No license, either express, implied or otherwise, is granted under any patents,copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons orproperty arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safetymeasures in its design, such as redundancy, fire-containment, and anti-failure features.NEC devices are classified into the following three quality grades:
\"Standard\a customer designated \"quality assurance program\" for a specific application. The recommended applicationsof a device depend on its quality grade, as indicated below. Customers must check the quality grade of eachdevice before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc.
The quality grade of NEC devices is \"Standard\" unless otherwise specified in NEC's Data Sheets or Data Books.If customers intend to use NEC devices for applications other than those specified for Standard quality grade,they should contact an NEC sales representative in advance.Anti-radioactive design is not implemented in this product.
M4 96. 5
因篇幅问题不能全部显示，请点此查看更多更全内容