E41938 N101L尼龙材料安规等级

Component - Plastics

E41938

E I DUPONT DE NEMOURS & CO INC

ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE19880-0713

101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1), E101(r9)(f1), E101L(r9)(f1)

Polyamide 66 (PA66), \"Zytel\

Min Thk

ColorALL

(mm)0.711.53.06.0

Comparative Tracking Index

0(CTI):Dielectric Strength (kV/mm):13High-Voltage Arc Tracking Rate

0

(HVTR):

Dimensional Stability (%):-(f1) -Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water

Exposure and Immersion in accordance with UL 746C.(r9) -Virgin and regrind up to 50% by weight inclusive, have the same basic material

characteristics for ALL colors down to 0.71mm. For thickness 0.40mm to 0.70mmthe same basic material characteristics exist with the exception of generic RTIsfor all properties and Regrind exceeding 25% is limited to V-2 Flammability for WT,RD, BK.NOTE -(1) Material designations that are color pigmented may be followed by suffix

letters and numbers. (2) Material designations may be prefixed by \"ZYT\" for Zytelor \"MIN\" for Minlon or \"DEL\" for Delrin or \"CRA\" for Crastin or \"RYN\" for Rynite or\"ETPV\" for ETPV or \"SOR\" for Sorona grades.ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings andrelated contents. ANSI/UL 94 small-scale test data is intended solely for determining theflammability of plastic materials used in the components and parts of end-product devices and

appliances, where the acceptability of the combination is determined by UL.Report Date: 1996-07-29Last Revised: 2013-11-20

FlameClassV-2V-2V-2V-2

HWI4322

HAI0000

RTIElec130130130130

RTIImp75757575

RTIStr85858585

Inclined Plane Tracking (IPT):-Volume Resistivity (10x ohm-cm) :14High Volt, Low Current Arc Resis

6

(D495):

© 2014 UL LLC

IEC and ISO Test Methods

Thickness

Test NameFlammability

Test MethodIEC 60695-11-10

UnitsClass (color)

Tested (mm)

0.711.53.06.0

Glow-Wire Flammability (GWFI)

IEC 60695-2-12

C

0.711.53.06.0

Glow-Wire Ignition (GWIT)

IEC 60695-2-13

C

0.71

ValueV-2 (ALL)V-2 (ALL)V-2 (ALL)V-2 (ALL)960960960960725

1.53.06.0

IEC Comparative Tracking IndexIEC Ball Pressure

ISO Heat Deflection (1.80 MPa)ISO Tensile StrengthISO Flexural StrengthISO Tensile ImpactISO Izod ImpactISO Charpy Impact

IEC 60112IEC 60695-10-2ISO 75-2ISO 527-2ISO 178ISO 8256ISO 180ISO 179-2

© 2014 UL LLC

Volts (Max)

CCMPaMPakJ/m2kJ/m2kJ/m2

--------

750800800--------

The materials covered in this database are incomplete in certain constructional features orrestricted in performance capabilities and are intended for use as components of completeequipment submitted for investigation rather than for direct separate installation in the field. THEFINAL ACCEPTANCE OF THE COMPONENT IS DEPENDENT UPON ITS INSTALLATION AND

USE IN COMPLETE PRODUCTS SUBMITTED TO UNDERWRITERS LABORATORIES.

Notice of Disclaimer