您的当前位置:首页防雨百叶窗工程施工规范

防雨百叶窗工程施工规范

2022-06-14 来源:小侦探旅游网
精心整理

室外防雨通风铝百叶窗工程

壹、 参考规范:

(1) 现行国家标准和规范(中国)

(2) 美国国际气流控制协会(AMCA500-L-99) 貳、 测试标准: 测试百叶窗之尺寸为1.0米x1.0米,在降雨量为每小时120毫米、百叶窗正面风速为每 秒13米的模拟降雨测试。 叁、功能需求 (1) 材料规格:CONSEPCRS-2050为水平双折百叶,百叶间距为40毫米。整个系统的深度不超过50毫米,百叶叶片厚度为1.3mm,边框铝挤型厚度为2.0㎜。双折型,材质均为6063-T5,叶片之凹型槽可接水并导水至两侧落水边框与排水系统相接,以有效阻雨。 (2) 通风率:>50% (3) 水密性能:△P≥150Pa,等级2(GB/T7106-2008建筑门窗水密性检测标准)。

(4) 阻雨率:在空气流通速度在每秒0米至2.5米之间(空气

-来源网络

精心整理

渗透量每秒每平方米0立方米至2.5立方米),以及模拟降雨每小时每平方米120.0公升的情况下,阻雨率大于95.0%,阻雨等级能达到B级。

等级 A B C D 防雨率(%) 100到99 98.9到95 94.9到80 80以下 允许的最大模拟雨水渗透量(L/hr/㎡) 0.75 3.75 15.0 超过15 肆、外观需求 产品组装后于工厂进行最后涂饰(粉末烤漆80um以上),涂饰后之外露表面 在运送前需用防护被覆;在完成涂饰过程后外露表面有可见之刮痕或损伤应除去。 伍、提交 (1) 空气流量和防水性能测试报告。 (2) 空气流通速度和压力损测试报告 (3) 测试结果由权威机构核实。 (4) 施工详图 陆、参考制造厂商 (1)上海康巨(CONSPEC) -来源网络

精心整理

StormResistantLouverSpecification

1. Reference

(1) NationalStandardsandCodesofPractice(China) (2) AirMovementandControlAssociationInternational,Inc.(

AMCA500-L-99) 2. TestStandard Baseonsimulatedraincondition,a1.0mx1.0mtestedunitatrainfallrateof120mm/hr andwithwinddirectedatlouverfaceofvelocityof13m/s. 3.PerformanceRequirements (1) General:CONSPECRS-2050DoubleBladesLouverpanelsshallconsistofanextrudedaluminumhorizontaldoubleblade,fastenedandsecuredbyextrudedaluminumbladebraces.Louverstobespacedat40mm.Totalsystemdepthnottoexceed50mm.Framesandbladestobefabricatedfrom6063-T5aluminumalloy.Bladesare1.3mmmin.thicknessandframestobe2.0mmmin.thickness.

(2) Ventilationrate:>50%.

(3) Waterproofperformance:△P≥150Pa,

-来源网络

精心整理

Level2(GB/T7106-2008).

(4) WindDrivenRain:Inthecaseofsimulatedrainfallof120L/

m2·hr,whentheairflowvelocityofbetween0to2.5m/s(airflowby0to2.5m3/s),therainperformanceeffectivenessgreaterthan95.0%.ThelevelscanreachclassB. RatingAchieved EffectivenessatEliminatingRainwaterEntry% A B C D 4.Finish AllLouverSystemcomponentsshallbecoatedinpowdercoated(unless80um)finishes.ColortobeselectedandapprovedbythearchitectfromtheCONSPECstandardrangeofcolorselection. 5. Submittals (1) Airflowandwaterproofperformancetestreport. (2) Airflowvelocityandpressuredroptestreport.

(3) Verificationthattestinghasbeencarriedoutatanaccredit

99to100% 95to98.9% 80to94.9% <80% edtestfacility. -来源网络

精心整理

(4) Shopdrawings.

6.Manufacturers

(1)ShanghaiConspecCo.,Ltd.

-来源网络

因篇幅问题不能全部显示,请点此查看更多更全内容